Gold (USD/oz)3,873.10Gold (USD/g)124.52Gold (TZS/g)331,946All mineral pricesas of 18 Nov 2026 · Mining Commission
Insights · Mining explainer · 16 Nov 2026

Gold purity explained: karats and fineness (24K to 9K) in Tanzania

Gold is weighed in grams, but it is paid for by purity. Two numbers on a ring or a bar — a karat and a fineness mark — tell you how much of it is really gold.

Afriglobal explainer card: gold purity table from 24K (999, 99.9%) to 9K (375, 37.5%), with a note that you are paid for the pure gold after assay

This explainer is general information for miners, jewellery buyers, investors and students. It is not a price list, an assay certificate or trading advice.

Two ways to say “how pure”

Karats (also spelled carats) divide an alloy into 24 parts. 24K is pure gold; 18K is 18 parts gold out of 24, or 75%, with the rest usually silver and copper. Fineness says the same thing in parts per thousand, and is what is usually stamped on jewellery and bars: 750 means 750 parts gold in 1,000.

Fineness is a minimum gold content. ISO 9202, the international standard for precious-metal jewellery alloys, defines it that way. A piece marked 750 should contain at least 75.0% gold.

KaratFineness markGold contentTypical use
24K999 (and 999.9)99.9% or moreBullion bars and coins
22K916about 91.6–91.7%Traditional and bridal jewellery, some coins
18K75075.0%Fine jewellery
14K58558.5% (14/24 is 58.3%)Everyday jewellery
9K37537.5%Lowest standard that may be called gold in the UK

Two details trip people up. 14K is mathematically 583, but most manufacturers make it slightly richer and stamp 585. And “24K” in practice means 999 or 999.9, because, as the World Gold Council notes, gold always carries a trace of impurity. Refined bars are often 999.9 (“four nines”).

How purity is tested

Fire assay (cupellation) is the reference method. A small weighed sample is melted with lead and silver, the base metals are burned off in a cupel, the silver is dissolved in acid, and the remaining gold is weighed. ISO 11426 sets out the method and recommends it for the finenesses in ISO 9202. It is accurate, but it destroys the sample.

X-ray fluorescence (XRF) is fast and does no damage, so many shops and buying counters use it for screening. But it reads only a thin surface layer. The LBMA warns that X-rays penetrate gold less than about 10 microns, so plating can deceive it. A confident XRF reading on a plated or uneven piece is not a fire assay.

Why purity matters when you sell gold in Tanzania

International gold prices are quoted for fine (pure) gold, per troy ounce (31.1035 g). A buyer therefore pays on the fine gold in your piece, not its gross weight. Ten grams of 18K jewellery hold 7.5 g of gold; ten grams of 9K hold 3.75 g. A doré bar from a small mine also contains silver and other metals, which is why it is assayed before it is priced.

In Tanzania, sell only through licensed channels: the official mineral markets (Mineral and Gem Houses), designated buying stations, licensed dealers and brokers, refineries or, where it applies, the Bank of Tanzania. The Mining Commission (Tume ya Madini) publishes daily indicative gold prices; compare them with the assayed fine-gold figure on your ticket. See today’s series on our Mining Commission prices page, and our guide to selling gold in Tanzania for royalties and the 20% domestic rule.

What this means

  • Sellers: ask for gross weight, assayed purity and fine-gold weight in writing before you agree a price.
  • Jewellery buyers: look for the fineness mark. Higher karat means more gold and a richer yellow; lower karat is harder and cheaper.
  • Investors: fineness and assay discipline sit behind every gold valuation, from a small PML to a refinery.

Quick tip: want to see the difference? Try 9K to 24K in our Gold Studio jewellery designer, set with Tanzanian gemstones.

Afriglobal Resources

Afriglobal Resources works on gold projects in Chunya (Mbeya) and Handeni (Tanga). Read about them on our projects page, or contact us to arrange a site visit.

Sources: World Gold Council, Gold jewellery: colour, carat and purity (karat definitions, fineness standards, 14K as 585, 999.9); LBMA, Purity of gold (fineness and caratage; 375, 585, 750, 916 hallmarks); LBMA, Physical market guidelines (fire assay; XRF penetration and plating); ISO 11426:2021, cupellation (fire assay); ISO 9202:2019, fineness of precious metal alloys; Mining Commission (Tume ya Madini) daily indicative prices; Mineral and Gem Houses Regulations 2019 (GN 418); The Mining Act, Cap. 123. General information only, not legal, trading or assay advice.

← All insights

Questions about investing in Tanzanian gold?

Talk to our team about our projects in Chunya and Handeni, or arrange a site visit.

WhatsApp us