From ore to bar: how gold is processed in Tanzania
Gold leaves the ground locked inside rock. Six main steps turn that rock into a bar of 99.99% gold, and Tanzania now has the refineries and markets to finish the job at home.

Here is a surprising number: according to the UN Environment Programme’s Global Mercury Assessment 2018, artisanal and small-scale gold mining is the world’s largest source of man-made mercury emissions, at almost 38% of the global total. How gold is processed matters for health, income and the environment.
1. Mining the ore
Gold-bearing rock (ore) is dug from underground shafts or open pits. In Tanzania this ranges from small-scale miners under a Primary Mining Licence to large mines under Special Mining Licences.
2. Crushing and grinding
The ore is crushed and then milled with water into a fine slurry so that the gold particles are freed from the rock. At one large plant described by OceanaGold, about 80% of the particles end up smaller than 70 microns, roughly the consistency of fine beach sand.
3. Gravity concentration
Gold is very heavy, so gravity tools such as sluices and shaking tables can separate it from lighter minerals. The UN-led planetGOLD programme promotes these mercury-free methods and reports that, used properly, they can recover more gold than traditional mercury amalgamation. For a fuller, first-principles guide — including sluices, tables, centrifugal concentrators and direct smelting — see mercury-free gold recovery for small-scale miners.
4. Mercury amalgamation: what the Minamata Convention says
Many small-scale miners still mix mercury with concentrate and burn off the mercury. Tanzania ratified the Minamata Convention on Mercury on 5 October 2020, and it entered into force for Tanzania on 3 January 2021. Under the Convention, countries with significant artisanal gold mining must plan to eliminate the worst practices: whole-ore amalgamation, open burning of amalgam, burning amalgam in residential areas, and cyanide leaching of material to which mercury has been added without first removing the mercury. Our guide to mercury-free gold recovery sets this out in more detail, with diagrams and Tanzania’s National Action Plan.
5. Cyanide leaching (CIL/CIP), elution and electrowinning
In larger plants, lime and a dilute cyanide solution are added to the slurry in tanks, with oxygen, to dissolve the gold. Activated carbon then adsorbs the dissolved gold: in carbon-in-leach (CIL) the carbon sits in the leach tanks, and in carbon-in-pulp (CIP) it is added after leaching. The “loaded” carbon is stripped of its gold in an elution circuit, and the gold-rich solution passes through electrowinning cells, where gold and silver plate onto steel cathodes. For how CIP and vat leaching differ, and when gravity may be enough, see CIP vs vat leaching in Tanzania.
6. Smelting to doré, then refining to 99.99%
The electrowon sludge is dried, mixed with fluxes and smelted at around 1,200 °C into doré bars, an impure alloy of gold and silver. Refineries then separate the metals to produce bullion. In Tanzania, the Mwanza Precious Metals Refinery says it can refine 480 kg of gold a day to 999.9 purity, and the Geita Gold Refinery also produces 99.99% bullion. The Bank of Tanzania lists Geita Gold Refinery, Mwanza Precious Metals Refinery and Eyes of Africa Ltd as delivery points for its domestic gold purchase programme.
Selling gold legally in Tanzania
Since March 2019 the Mining Commission has run mineral markets (Mineral and Gem Houses), and the 2019 Mineral and Gem Houses Regulations make trading outside them (or, for licensed brokers, outside designated buying stations) an offence. Since 1 July 2024, authorised miners and licensed dealers must set aside at least 20% of their gold for sale within Tanzania to refineries, smelters, jewellers or the Bank of Tanzania, and the Finance Act 2025 extended this to all mineral right holders and dealers. For a fuller guide to official counters, royalties, the Bank of Tanzania and the 20% rule, see selling gold in Tanzania.
What this means
- For small-scale miners and PML holders: better crushing and gravity concentration can raise recovery and reduce mercury exposure; sell through official mineral markets and keep your records.
- For investors: local refining and the 20% domestic set-aside are now part of the gold value chain, so plan offtake and processing around them.
- For students and the public: mine, crush, concentrate, leach, smelt, refine: six steps from rock to bar.
Quick tip: before you sell, check the day’s gold price on our Mining Commission prices page so you know what your gold is worth.
Afriglobal Resources and gold processing
Afriglobal Resources works on gold mining and processing in the Mbeya and Tanga regions. See our projects, today’s Mining Commission mineral prices, our explainers on CIP vs vat leaching, mercury-free gold recovery and mining licences in Tanzania, or contact us to arrange a site visit.
Kwa Kiswahili (makala kamili)
Toleo kamili la makala hii — si muhtasari tu — lipo kwa Kiswahili: Kutoka mwambani hadi kwenye baa: jinsi dhahabu inavyochakatwa Tanzania.
Sources: UNEP Global Mercury Assessment 2018; Minamata Convention, United Republic of Tanzania; Minamata Convention text, Annex C; planetGOLD; OceanaGold, Ore processing; Mwanza Precious Metals Refinery; Geita Gold Refinery; Bank of Tanzania, Domestic Gold Purchase Program notice (8 Oct 2024); Mineral and Gem Houses Regulations 2019 (GN 418); USGS, Mineral Industry of Tanzania 2019; Mining (Minerals and Mineral Concentrates Trading) (Amendment) Regulations 2024; Finance Act 2025 summary by Rex Attorneys. This article is general information, not legal or technical advice; check current rules with the Mining Commission.
Questions about investing in Tanzanian gold?
Talk to our team about our projects in Chunya and Handeni, or arrange a site visit.
